Ford Transit | Drop Down Ladder Rack for 2 Ladders | The Harrier
Ford Transit | Drop Down Ladder Rack for 2 Ladders | The Harrier
$2,420.00 $2,623.00
Selection will add to the price
Couldn't load pickup availability
Share
Ford Transit Drop Down Ladder Rack: The G2000 Harrier Holds 2 Ladders and Brings Them Down to You
Slides Off the Back of Your Van and Lands at Ground Level
Ford builds the Transit cargo van with dedicated roof mounting points for ladder racks. It is offered in Low, Medium, and High roof heights and in 130-inch, 148-inch, and 148-inch Extended lengths, with exterior height starting near 82 inches and passing 110 inches on the High roof.
When ladder work is part of every job, climbing onto a bumper or stretching up to a roof gets old fast. Here is the Transit rack at work: Video: Harrier demo for work vans
The Harrier for the Ford Transit is a heavy-duty hydraulic system built around 2 ladders. Pull it rearward and it clears the roof, then settles at ground level, so ladders come off and go back on without an overhead lift. Contractors, electricians, and plumbers running Transits use it daily, and a second Harrier on the same roof raises your capacity to 4 ladders.
Ford Transit Compatibility
Uses the Transit's Built-In Roof Points, No Drilling Needed
The Transit kit relies on the mounting points Ford already placed in the roof, so the installation stays clean and the sheet metal stays intact.
Some of the pictures show a different make of van. The Harrier is the same unit whichever vehicle it sits on.
F.A.Q.
Does the Harrier work with every Transit roof height and length?
The Transit kit attaches to the factory roof mounting points and includes the roof rack, and we make it for all Transit model years. If you are unsure about your roof height or length, reach out before you order and we will help confirm your configuration.
What happens to the rack when I buy a newer Transit?
It moves over with you. A new Transit takes the same kit, and if you change to another van brand you only need that vehicle's roof mounting kit, because the Harrier itself carries across untouched.
You can choose to install two Harriers on one roof to transport 4 ladders.
Made for contractors, electricians, plumbers, and service professionals, The Harrier rear ladder rack transforms your van into a more efficient and body-friendly work vehicle.
When it’s time to replace your van, the rack can be easily removed and transferred to your next vehicle, protecting your investment and maximizing long-term value.
Loading two extension ladders - Secure your ladders onto two hoop retainers.
-
Ladder Fitment
The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall. Measure your ladders before ordering.
-
Extra Storage Space On Van Roof Rack
The Harrier not only comes with a Drop Down Ladder Rack rear sliding chassis, it also comes with a van roof rack with three 68" cross bars. By placing The Harrier on one side of the roof rack, you can utilize the other size with more ladders or materials.
-
Ergonomic Ladder Loading Designed for Daily Commercial Use
Stop Lifting Overhead
With The Harrier, you simply stand your ladder upright and lean it into the rack.
There’s no need to lift ladders above shoulder height.- Lower shoulder strain and fatigue
- Reduce risk of back injury
- Improve jobsite efficiency
- Decrease lost time due to work injuries
- Lower shoulder strain and fatigue
-
Hydraulically Assisted Rear Slide and Drop System
Smooth, Controlled Movement in Under 30 Seconds
The Harrier uses heavy-duty gas struts to assist both lowering and raising your ladders.
- Hydraulically assisted lift and drop
- Full lowering cycle in under 30 seconds
- Sliding rear chassis locks securely in transport position
- Hydraulically assisted lift and drop
-
Why Contractors Choose the Harrier Over Traditional Ladder Racks
Side-Drop Ladder Rack vs The Harrier
Traditional Drop Down Ladder Racks
- Pivot over the side of the van
- Ladder still sits above your head
- Requires overhead lifting
- Strains shoulders and back
The Harrier Rear Drop Ladder Rack
- Slides off the rear of the van
- Drops to ground level
- No overhead lifting required
- Designed for ergonomic vertical loading
- Pivot over the side of the van
-
Built for Professional Vans
Installation and Construction
- Chassis arrives fully assembled
- Weighs 80 lbs.
- No- Drill design specifically for your van
- Manufactured in Italy by Gentili, a global leader in professional van equipment
Ladder Compatibility
- Holds up to two ladders
- Secure 4 ladders with 2 Harriers on one roof.
- Extension ladders up to 40 feet.
- Compatible with most ladders
- Weight capacity: 132 lbs
See How It Works:
With Optional Locking Device:
Perfect for Leased Vans or Fleet Vehicles
Because The Harrier can install on vans without drilling holes, it can be removed and transferred to another compatible van when your lease ends.
That makes it a long-term tool investment instead of a one-vehicle expense.
-
What’s Included:
- The Harrier Drop Down Ladder Rack
- Ladder straps
- Van-specific roof rack
- Harrier Operating Pole
This is a complete roof ladder rack system — not a partial kit.
-
Shipping:
Orders are processed within 48 hours and ships from Dayton, OH within 6–8 business days.
The frieght arrives by LTL (light truck load) on a long pallet and needs to be signed for when the package arrives.
-
Warranty Coverage:
The Harrier Drop Down Ladder Rack includes a 3-year manufacturer warranty covering product defects.
Installation Time
Typical installation time is approximately 4 hours.
More Information:
Conduit Carrier:
Frequently Asked Questions
Will this ladder rack fit my van?
Yes. We provide van specific mounting kits compatible with most models.
Can I transfer this ladder rack to another van later?
Yes. Because installation requires no drilling, the system can be removed and installed on another compatible vehicle.
How many ladders can The Harrier carry?
The rack is designed to safely carry two ladders with a combined weight of up to 132 lbs.
How much does The Harrier weigh?
The Harrier weighs 80 bls.
Does the ladder actually reach the ground?
Yes. Unlike side-pivot racks, The Harrier lowers to ground level, allowing vertical loading without overhead lifting.
Is the system difficult to operate?
No. The hydraulic strut system assists the movement, and the full lowering cycle takes less than 30 seconds.
Will this rack fit both extension and step ladders?
Yes. The Harrier Ladder Rack is versatile, accommodating extension ladders (up to 40ft.) and step ladders.
Is professional installation required?
While professional installation is recommended, The Harrier is designed for a simple DIY installation.
Are drop-down ladder racks worth the extra cost?
Yes, for daily users, they significantly reduce back/shoulder injuries, improve efficiency, and make high-roof loading much safer.
Do they work in all weather conditions?
Yes, The Harrier Drop Down Ladder Rack is engineered with all aluminum and stainless steel components.
Is there a drop down ladder rack for enclosed cargo trailers, step vans, trucks, or service bodies?
Yes, The Harrier Drop Down Ladder Rack is the only drop down ladder rack that can be mounted to enclosed trailers, step vans, truck racks, and service bodies. The Harrier has 6 universal mounting feet that can attach to any flat surface.